景德镇湖田窑北宋褐彩瓷枕的化学组成及工艺特征分析
DOI:
作者:
作者单位:

(1.景德镇陶瓷大学,江西景德镇 333001;2.北京科技大学冶金与材料史研究所,北京 100083;3.故宫博物院,北京 100009)

作者简介:

吴军明(1983—),男,江西临川人,副教授,2007年硕士毕业于景德镇陶瓷学院,2016年考入北京科技大学就读科学技术史专业博士,研究方向为传统陶瓷工艺和陶瓷科技考古,Email: woshiwxb@126.com,44083386@qq.com

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助(51402137),江西省自然科学基金资助(20161BAB216118),江西省教育厅人文社科重点研究基地项目资助(JD15114)


Chemical composition and technological characteristics of brown, Northern Song Dynasty pointillist porcelain pillows of the Jingdezhen Hutian Kiln
Author:
Affiliation:

(1. Jingdezhen Ceramic Institute, Jingdezhen 333001, China;2. University of Science and Technology Beijing, Beijing 100083, China;3.The Palace Museum, Beijing 100009, China)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 文章评论
    摘要:

    景德镇湖田窑北宋仁宗时期(1023—1063年)新出现了褐色点彩装饰器物,其工艺特征、技术来源和对景德镇元代以后釉下彩绘工艺的影响一直受到广泛关注。研究采用能量色散X荧光光谱分析仪、光学相干断层扫描仪、体式显微镜、高温热膨胀仪等,分析了8件北宋褐色点彩瓷枕样品的胎、釉、彩的化学组成,及胎体吸水率和烧成温度,初步揭示了景德镇湖田窑出土北宋褐色点彩瓷枕的制作工艺和化学组成特征。结果显示,褐彩瓷枕胎体表面留有明显的网格纹痕迹,在棱边内侧有镶接和泥条加固痕迹,应是在布上拍打成泥片后,逐面镶接成型制得;胎体烧结状态、烧成温度和吸水率相差较大,表面褐色图案为采用富铁原料在胎体表面彩绘后,施灰釉后经1100℃以上高温一次烧制而成。研究结果不仅有利于明晰其化学组成特征和工艺特征信息,而且将为研究和揭示景德镇早期彩绘装饰的发展提供科学参考。

    Abstract:

    The brown pointillist porcelain first appeared at the Jingdezhen Hutian Kiln during the period of Emperor Renzong of the Northern Song Dynasty (AD 1023—1063). The origin of painting technology of the Jingdezhen Hutian Kiln and its influence on the famous under glaze in Jingdezhen after the Yuan Dynasty are the focuses of research. Eight porcelain pillow shards decorated with brown quincunx patterns of the Northern Song Dynasty Jingdezhen Hutian Kiln were selected for study of their chemical composition and the technological characteristics using energy dispersive Xray fluorescence (EDXRF), optical coherence tomography (OCT), stereomicroscopy and automatic high temperature dilatometry. The EDXRF results indicate that the brown patterns of the pillow shards have a homogeneous composition high in ferric oxide (Fe2O3) content, relatively high in titanium dioxide (TiO2), but contain almost no manganese oxide (MnO). The OCT and stereomicroscope analyses reveal that the patterns were painted before glazing. The porcelain body preserved mesh grid marks. Inside the edges, there are traces of joints and reinforcement using mud. These marks suggested that the porcelain pillows were made first on a cloth mold, then assembled together. The bodies vary in firing state, firing temperature and water absorption rate. The brown dots were painted and fixed by a single firing at a temperature of higher than 1100℃ after painting and glazing.

    参考文献
    相似文献
    引证文献
引用本文
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-12-15
  • 最后修改日期:2017-05-24
  • 录用日期:
  • 在线发布日期: 2018-01-17
  • 出版日期:
您是第位访问者
主办单位:上海博物馆 编辑出版:《文物保护与考古科学》编辑委员会
地址:上海市徐汇区龙吴路1118号,上海博物馆文物保护科技中心,《文物保护与考古科学》编辑部
电话:021-54362886 传真:021-54363740 E-mail:wwbhykgkx@163.com
文物保护与考古科学 ® 2024 版权所有
沪ICP备10003390号-3
沪公网安备 31010102005301号