试析中国先秦时期透空蟠龙纹青铜器铸造技术的发展与传播
DOI:
作者:
作者单位:

(南京博物院,江苏南京210016)

作者简介:

万俐(1956—),男,1987年毕业于南京师范大学美术系,研究馆员,Email:wanlinb@126.com

通讯作者:

中图分类号:

基金项目:

南京博物院2010年度科学研究项目资助


Preliminary discussion of the development and transmission of casting techniques for bronzes with hollowedout dragon designs in PreQin China
Author:
Affiliation:

(Nanjing Museum,Nanjing 210016, China)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 文章评论
    摘要:

    为探讨中国先秦时期透空蟠龙纹青铜器铸造技术的发展与传播途径,本工作根据已有资料分析了先秦时期透空蟠龙纹青铜器的六个特征,结合其特征将铸造工艺的发展分为四个阶段:即以芮国墓透空龙纹方盒、新绛蟠蛇纹镂空鼎为代表的摸索阶段,愠儿盏、许公宁透空附饰为代表的形成阶段,淅川下寺铜禁、曾侯乙尊盘为代表的成熟阶段和以陈璋壶为代表的高级阶段。从这些透空蟠龙纹青铜器的出土地点及考古学家对其年代的考证,其传播的路径大约由韩国至楚国,再传播到其它地方,即今天的陕西至河南、湖北、湖南、江苏、河北等省。

    Abstract:

    In this paper, six characteristics of hollowedout bronzes were analyzed. The technological development can be divided into four development phases. The initial phase is represented by a box with a hollowedout dragon design from Rui tomb and the Ding (鼎) with a hollowedout snake embossment from Xinjiang; the forming phase is represented by Yun’er Zhan (盏) and Xugong Ning handles with hollowedout dragons; the ripe phase is represented by bronze Jin(禁) from Xiasi in Xichuan and Zenghou Yi Zun(尊) and Pan(盘); the highlevel phase is represented by the Chen Zhang Hu (壶). According to the excavated plots and the dates of these bronzes having hollowedout dragon or snake designs, it is suggested that this technique spread from the Han State to the Chu State and then to the other areas, which include today’s Shanxi, Henan, Hubei, Jiangsu and Hebei provinces.

    参考文献
    相似文献
    引证文献
引用本文
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2013-03-29
  • 最后修改日期:2013-07-18
  • 录用日期:
  • 在线发布日期: 2014-03-06
  • 出版日期:
您是第位访问者
主办单位:上海博物馆 编辑出版:《文物保护与考古科学》编辑委员会
地址:上海市徐汇区龙吴路1118号,上海博物馆文物保护科技中心,《文物保护与考古科学》编辑部
电话:021-54362886 传真:021-54363740 E-mail:wwbhykgkx@163.com
文物保护与考古科学 ® 2024 版权所有
沪ICP备10003390号-3
沪公网安备 31010102005301号